Hi Alton,
Go the distance & pre-spray the project with aluminum/galvanized metal
primer that's specifically designed for that sorta stuff...
I never did that on a major project that I built here years ago, & I've
regretted it ever since: I applied some peel-and-stick accent striping on
the front surface of the thing, and when I removed a section of it because
it was crooked, off came the striping alright, but with both topcoat and
primer attached...!
The front panel now sports an accent "stripe" of bare aluminum...! A
continuous reminder to me of the importance of proper prep work...Hi Hi.
~73~ Eddy VE3CUI - VE3XZ
********************************
----- Original Message -----
From: "Glen Zook" <gzook@yahoo.com>
To: <amps@contesting.com>; "Alton McConnell" <amcconnell3@hotmail.com>
Sent: Friday, July 31, 2009 12:35 PM
Subject: Re: [Amps] spray painting metal
>
> Although aluminum "requires" a "special" primer, I have had very good
results just using the "el cheapo" ($1.12 per can) ColorPlace #20010 gray
primer that I get at Walmart.
>
> Glen, K9STH
>
> Website: http://k9sth.com
>
>
> --- On Fri, 7/31/09, Alton McConnell <amcconnell3@hotmail.com> wrote:
>
> Any advice on good primers for aluminum?
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|