Amps
[Top] [All Lists]

Re: [Amps] Need source for non-inductive power resistors

To: 4x1ad <4x1ad@iarc.org>
Subject: Re: [Amps] Need source for non-inductive power resistors
From: PA3DUV <pa3duv@planet.nl>
Date: Mon, 04 Apr 2005 21:30:35 +0200
List-post: <mailto:amps@contesting.com>
http://www.xs4all.nl/~barendh/Indexeng.htm

Prices are in Euro


1 Euro = approx  1.2 US Zloty


Flange dummies:

KDI 50-40   Flange type 50 ohms -  40W max. 2 GHz special offer 
13.16
RFP 50-50TG Flange type 50 ohms -  50W max. 4 GHz 
44.92
RF-1055     50 ohms - 100W max. 4 GHz (Florida RF Labs-ex equipment) 
40.39
EMC-3563    50 ohms - 100W max. 6 GHz (EMC Labs- ex equipment 
58.54
RFP150-50TG Flange type 50 ohms - 150W max. 2 GHz 
58.95
RFP150-50TAS 50 ohms- 150W max. 2 GHz 
29.00
RFP250-50TG Flange type 50 ohms - 250W max. 3 GHz 
69.00
RFP250-100T Same, 100 ohms 
69.00
RFR40-100   Flange type resistor (2 leads) 40W - 100 ohms 
19.00
BARRY IND.  100 ohm-30W max.10 GHz gold plated 1-hole resistor tape ends 
7.50
Florida     Resistor 50 ohms - 20W - 4 GHz (2 isolated tape ends) 
9.95
Florida     Dummy load 200 ohms - 20W - 2 GHz (1 isolated tape end) 
9.95




----- Original Message ----- 
From: "4x1ad" <4x1ad@iarc.org>
To: "PA3DUV" <pa3duv@planet.nl>
Sent: Monday, April 04, 2005 9:04 PM
Subject: Re: [Amps] Need source for non-inductive power resistors


> Well, if the price is not an issue, go to Fair Sale of Nebraska.
>
> 73
> 4X1AD
>
> ----- Original Message ----- 
> From: "PA3DUV" <pa3duv@planet.nl>
> To: "4x1ad" <4x1ad@iarc.org>
> Cc: <amps@contesting.com>
> Sent: Monday, April 04, 2005 4:38 PM
> Subject: Re: [Amps] Need source for non-inductive power resistors
>
>
>> Hi Morel,
>>
>> Me too, I'm building a 2 kilowatt splitter combiner.
>> I'll let you know one I've found a source.
>>
>> Cheers, Dick Knol
>> PA3DUV
>>
>>
>> ----- Original Message ----- 
>> From: "4x1ad" <4x1ad@iarc.org>
>> To: <amps@contesting.com>
>> Sent: Monday, April 04, 2005 5:43 PM
>> Subject: [Amps] Need source for non-inductive power resistors
>>
>>
>>> I'm looking for a source in U.S. for few non-inductive power resistors 
>>> at reasonable prices. For example 50,100, 200, 300 Ohms at 100-200W, any 
>>> combination for building a 50Ohms 1kW++ dummy load inside an antenna 
>>> tuner.
>>>
>>> 73
>>> Morel
>>> 4X1AD
>>> 4x1ad@iarc.org
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>