Congrats Kathy.
And the VU4 was loud on 10M this morning.
Carl
KM1H
----- Original Message -----
From: "Kathy Bookmiller" <wb2aio@yahoo.com>
To: <amps@contesting.com>
Sent: Wednesday, March 30, 2011 1:17 PM
Subject: [Amps] SB200 diodes post script
>I wish to thank everyone for their input on my diode problem. Just wanted
>to let everyone know that they arrived from Mouser yesterday afternoon
>(Tuesday) This was a pleasant surprise to me since I'd checked the tracking
>number the night before and it said they would arrive Wednesday! Rather
>strange that UPS got that wrong. I hadn't relished removing the diode board
>from the amp., with all the taking it apart to do to be able to remove it.
>So I removed all the old diodes, drilled out the holes a bit to accommodate
>the larger lead size and mounted the new ones on the bottom of the board or
>up-side down as I figured they won't know if someone doesn't tell them. I
>had checked the filter caps and the tubes earlier while waiting for the UPS
>guy to show and there wasn't any problems indicated with them.
> Put it back together and it is back working fine:)
> It is nice knowing it is ready for when a P5 shows....
> 73,
> Kathy, RN
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|