Drill holes, add jumpers and epoxy Snap-Ins to the board is one option.
Another is to remove the guts from the cans and slide in a Snap-In. Ive done
it both ways.
Carl
KM1H
----- Original Message -----
From: "Tim Kass" <k8wbl@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, April 03, 2011 12:24 PM
Subject: [Amps] Dentron 160 - 10L
Hello group, still working on my Dentron amp...thanks to Mike Baker for
helping out a great deal...fixed most..but now need to replace the large
caps. Problem I can only find screw type or snap in caps, neither which are
really exact replacement for the old style metal cans that are mounted in
these..I was wondering what others have done..mounted another board circuit
board or just what imaginative things can be done here.. thanks... I include
a pic..
NOTE: You can see the Temporary board for the diodes, going to re-mount them
on a piece of plexiglass...just made it easier to reach...large hands...hi
hi
73, Tim K8WBL
--------------------------------------------------------------------------------
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|