>> -----Original Message-----
>> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
>> On Behalf Of Bill, W6WRT
>> Sent: Wednesday, March 24, 2010 8:49 PM
>> To: amps@contesting.com
>> Subject: Re: [Amps] placement of RF choke bypass cap.
>>
>> ORIGINAL MESSAGE:
>>
>> On Wed, 24 Mar 2010 17:24:21 -0400, "Gary Schafer"
>> <garyschafer@comcast.net> wrote:
>>
>> >And no,
>> >the current still doesn't flow thru the antenna disks as you would like
>> to
>> >believe.
>>
>> REPLY:
>>
>> "There is none so blind as he who will not see". Dunno who said that,
>> but he was probably following this thread. :-)
>>
>> The two disk experiments prove what I said. To quote one of the
>> experimenters "Bill is right".
>>
>> Believe what you want. I'm done.
>>
>> 73, Bill W6WRT
>
> I see that you don't want to address the other questions asked of you
> several times.
> I and others have provided you with several examples of RF NOT flowing
> thru
> a plate but you ignore those and hang on a convoluted argument that can't
> be
> easily proven either way. Especially when you don't see all the parameters
> involved.
>
> If you want to know about the "disks on the antenna" story, search
> rec.radio.amateur.antennas group. This was discussed at length a few years
> ago there by some very knowledgeable fellows including W7EL, the author of
> eznec.
>
> 73
> Gary K4FMX
Gary, I believe he is following the JI and Measures school of discussion.
Ignore what doesnt make you look good and treat the rest as a circular
argument until everyone gives up. Reminds me of Toyota.....
Carl
KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|