Hi,
Like this inexpensive small HV dis caps, Can it replace the high current
/volt door knobe caps in tube amplifie?Certainly, they must be in parallel.I
have tested them in a 3xFU50(same as Russian GU-50 and Western SRS552 and
LS50) 300W amplifier, I use them in parallel in plate and load caps,even
plate-blocking cap.it seems all OK, no heat. I want to know,the small disk
caps in parallel can replace large door knobe in kw level amplifier?How much
its current rating each small cap?
73! Hsu
----- Original Message -----
From: "Mike McCarthy, W1NR" <lists@w1nr.net>
To: "Kelly Jones" <kjones@virtualcohesion.com>; <amps@contesting.com>
Sent: Wednesday, December 20, 2006 3:03 AM
Subject: Re: [Amps] HV Disc caps needed
>
> www.mouser.com stock no. 140-123P9-102K, $2.99 each.
>
> Mike, W1NR
>
> ----- Original Message -----
> From: "Kelly Jones" <kjones@virtualcohesion.com>
> To: <amps@contesting.com>
> Sent: Tuesday, December 19, 2006 1:15 PM
> Subject: [Amps] HV Disc caps needed
>
>
>> Anybody have a source for 1000pf 12KV ceramic disc capacitors? I checked
>> Digi-Key last night, but they only went to 6KV (that I could find). I
>> need
>> about 10 or so.
>>
>> 73
>> Kelly - N0VD
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|