Amps
[Top] [All Lists]

[AMPS] Source for 811 tubes

To: <amps@contesting.com>
Subject: [AMPS] Source for 811 tubes
From: charles@ab7sl.com (Charles)
Date: Sun, 17 Sep 2000 17:53:59 -0700
There are at least 4 sources of new 811A tubes that I have verified.

1. Ameritron sells a Chinese 811A they claim is better then the Svetlana's
    http://www.ameritron.com   1-662-323-8211


2. RF Parts lists three additional sources for new 811A's
    http://www.rfparts.com    1-800-737-2787




Charles T Johnston - AB7SL
charles@ab7sl.com
AB7SL- Ham Radio Pages - with 3D Art Gallery
http://www.ab7sl.com



----- Original Message -----
From: "Michael Tope" <W4EF@dellroy.com>
To: "AMPS" <amps@contesting.com>
Sent: Sunday, September 17, 2000 5:21 PM
Subject: [AMPS] Source for 811 tubes


>
> A friend of mine gave me an old homebrew 4 x 811 amp that I have been
> playing around with for the last few weeks. At first the amplifier would
> work, but now, it keeps blowing one of the grid leak bias resistors
> (51 ohms). The failure occurs when I turn on the high voltage (+1600
VDC).
> At this point the amplifier is in its standby mode with the grid biased
to
> cutoff at -170 volts. Looks like one of the tubes has gone gassy and is
> flashing the anode supply over to ground the grid leak resistor.
>
> Anyway, looks like I will need at least one additional tube. Can anyone
> recommend a good source/reasonable price?
>
> Thanks,
>
> Mike,
W4EF......................................................................
................
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/amps
> Submissions:              amps@contesting.com
> Administrative requests:  amps-REQUEST@contesting.com
> Problems:                 owner-amps@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>