Hi Fred,
Have a look at the contacts on side of the slug, and also the spring
contacts of the slug holder.These contacts should be clean with no or very
low transfert resistance.Might also be a loozen contact inside the teflon
cap. It can be repaired, but needs a bit of work to calibrate again. A good
one to compare the curve, and use it only as a reference. Dont open the good
one.
Good luck.
Jos on4kj
I have still my first Bird-43 in use since 1968, when I started as a field
ingeneer in mobil radio, it still does the job.
----- Original Message -----
From: "LU6KK Sehringer" <lu6kk@hotmail.com>
To: <amps@contesting.com>
Sent: Sunday, October 27, 2002 6:12 PM
Subject: [Amps] Bird slug VHF
>
> Hello All: I have bird slug with some problem, its 25C (25w 100mhz-...), I
> can read only few watts with use 25w, and in certain moment read full
scale
> 25w, any idea what its the problem on this case?.
> The slug not see blows externally.
> Thanks.
>
> Fred LU6KK
>
>
>
>
> _________________________________________________________________
> MSN Fotos: la forma más fácil de compartir e imprimir fotos.
> http://photos.msn.es/support/worldwide.aspx
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
|