Barrie,
The B&W FL6-1500 and the ICE 426 are the best high power ones Ive tested and
not blown up. Both are in use here, the B&W on the regular station (1200W)
and the ICE on my "conversion" bench for both input and outputs. I'd go with
the ICE if you intend to get into the 8877 class.
I built my own input bandpass filter but ICE has since come out with their
model 412; I havent evaluated it but it is a very narrow band 50.0 to 50.5
affair which should be a fine performer for polluted areas. They also have a
412W which covers the full band.
Carl
KM1H
----- Original Message -----
From: "Barrie Smith" <barrie@centric.net>
To: <amps@contesting.com>
Sent: Thursday, September 27, 2007 1:36 PM
Subject: [Amps] Low Pass Filter
> Carl:
>
> You mentioned using low pass filters on 6M because of your location.
>
> I'm in much the same situation here. Could you describe these filters?
> Are they commercial units?
>
> 73, Barrie, W7ALW
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|