That HB one has seen a lot of service but it still wont tell me if a 4-1000A
will hold up for plate modulated AM at 5KV DC (-; I had a few unknown
pulls that let loose on voice peaks.
The saving grace was that it cost almost nothing as I already had all the
parts or found them at a hamfest for pennies.
Carl
KM1H
----- Original Message -----
From: "Jim Barber" <audioguy@charter.net>
To: "Carl" <km1h@jeremy.mv.com>
Cc: "AMPS" <amps@contesting.com>
Sent: Tuesday, September 28, 2010 5:29 PM
Subject: Re: [Amps] Chinese hipot RK2671A?
>
> I'd considered a sign xformer and a variac, but by the time I put metering
> circuits and a current trip of some kind on it I'd be well on the way to
> buying one. Factoring laziness probably puts it over the top...
>
> Thanks,
> Jim, N7CXI
>
> On 9/28/2010 2:16 PM, Carl wrote:
>> Im using a similar Jap version I found at the local surplus place for
>> $65.
>>
>> Earlier I built one that would get up to 15KV using a neon sign
>> transformer but the Jap one is more convenient within its ratings.
>>
>> Carl
>> KM1H
>>
>>
>> ----- Original Message ----- From: "Jim Barber" <audioguy@charter.net>
>> To: "AMPS" <amps@contesting.com>
>> Sent: Tuesday, September 28, 2010 3:34 PM
>> Subject: [Amps] Chinese hipot RK2671A?
>>
>>
>>> Anyone have any experience (good or bad) with the RK2671A DC/AC Hipot
>>> tester, probably from Shenzen Meiruike Electronics?
>>>
>>> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=390104450926&Category=4678&_trkparms=algo%3DLVI%26its%3DI%26otn%3D2
>>>
>>>
>>> Failing that, any recommendations for a good brand/model to look for in
>>> the used market?
>>>
>>> Thanks,
>>> Jim, N7CXI
>>>
>>>
>>>
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|