Amps
[Top] [All Lists]

Re: [Amps] LK-500: no 15 meters????

To: "R. David Eagle" <kb8nnu@yahoo.com>, <amps@contesting.com>
Subject: Re: [Amps] LK-500: no 15 meters????
From: "Carl" <km1h@jeremy.mv.com>
Date: Sun, 13 Sep 2009 21:34:11 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Shorted NT cap?  They dont exactly use decent spacing or quality variables 
in there.

Carl
KM1H


----- Original Message ----- 
From: "R. David Eagle" <kb8nnu@yahoo.com>
To: <amps@contesting.com>
Sent: Sunday, September 13, 2009 8:46 PM
Subject: [Amps] LK-500: no 15 meters????


Hello all....thanks to all of you who have gratiously been providing tips 
and advice on my first amp project - the resurrection of an Amp Supply 
LK-500 NT.

I recently got it on the air to check operation on all bands and I have 
great power output on all bands but 15. I have gone through the band switch 
and everything appears to be ok. BUT this one really made me scratch my 
head.

When I key this is what I get:
750 plate current
3200 plate voltage
about 200 grid current

Power output is only about 10 watts.....?????

any thoughts or ideas would greatly be appreciated....

Thanks again,

Dave
KB8NNU



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>