Amps
[Top] [All Lists]

[Amps] Henry 4K-Ultra

To: "AMPS" <amps@contesting.com>
Subject: [Amps] Henry 4K-Ultra
From: "Bob Maser" <bmaser@tampabay.rr.com>
Date: Sun, 11 Dec 2005 10:45:24 -0500
List-post: <mailto:amps@contesting.com>
I now have the operating and maintenance manual, thanks to W6RU Terry.  I 
though that the alignment of the tune control and all the other components 
that run off the common drive chain would be covered but it is not.  Does 
anyone have the alignment instructions for the 4K-Ultra? Based on my current 
settings, it looks like when the tune turns counter is set to 000 the cap is 
at 400pf and the three air variables under the deck are fully meshed(almost, 
like 95%) and the 2 roller inductors underneath are almost to their extreme 
endpoints.  I haven't moved anything since taking the front panel off so 
maybe I should just leave everything alone, but that wouldn't be any fun.

Bob  W6TR 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>