A little caution when 'pulling a few turns'. The choke can be resonant around
25MHz and 'pulling a few turns' will undoubtedly raise it. The risk is that it
could become a little toasty if you use the amp at the bottom of 10m. It might
be worth making some measurements first.
How is the choke in the LK-500 different from the Alpha? About where is it
resonant? Might be useful info for reworking other amps.
Martin, HS0ZED
Quoting Carl <km1h@jeremy.mv.com>:
> 12M is the problem band and removing 3-4 turns may move the resonance as it
> does with Dentrons. Since I dont use my 76PA on WARC (The LK-500ZC does well
>
> there) I havent tried it.
>
> Carl
> KM1H
>
>
> ----- Original Message -----
> From: "Bob K6UJ" <k6uj@pacbell.net>
> To: <amps@contesting.com>
> Sent: Wednesday, March 28, 2012 11:43 AM
> Subject: Re: [Amps] gettering question
>
>
> > Carl,
> >
> > Thanks Carl, I will be going thru it and plan to replace all the filter
> > caps, resistors, and the electrolytic. I got this amp in a trade
> > and although it has been converted to two 3CPX800's, he didnt do anything
>
> > else to it. Im pretty sure it still has the original filter caps
> > so it definetely needs these replaced.
> >
> > I have another 76CA, my daily use amp, which I have converted over two
> > two 3CPX800's, changed the filter caps plus the things you
> > recommended and it is running great.
> >
> > BTW, what WARC bands are safe to use with the Alpha 76's ? If I
> > remember, there is one band I should avoid.
> >
> > 73,
> > Bob
> > K6UJ
> >
> >
> >
> >
> > On Mar 28, 2012, at 7:12 AM, Carl wrote:
> >
> >> Id be more concerned about the PS if the filters havent been replaced.
> >> There are also a few resistors and a small electrolytic that change
> >> value/go leaky.
> >>
> >> An hour should be sufficient as that tube appears to age well if it isnt
> >> a well abused pull.
> >>
> >> Carl
> >> KM1H
> >>
> >>
> >> ----- Original Message ----- From: "Bob K6UJ" <k6uj@pacbell.net>
> >> To: <amps@contesting.com>
> >> Sent: Tuesday, March 27, 2012 11:48 PM
> >> Subject: [Amps] gettering question
> >>
> >>
> >>> With an amplifier that uses a pair of 3CPX800's, like my converted
> >>> Alpha 76CA, how long should I
> >>> let it sit there heating the filaments before using, when it hasn't
> >>> been used for 2 or 3 years ? Couple of hours, 1 day, ?
> >>>
> >>> Bob
> >>> K6UJ
> >>>
> >>>
> >>> _______________________________________________
> >>> Amps mailing list
> >>> Amps@contesting.com
> >>> http://lists.contesting.com/mailman/listinfo/amps
> >>>
> >>>
> >>> -----
> >>> No virus found in this message.
> >>> Checked by AVG - www.avg.com
> >>> Version: 10.0.1424 / Virus Database: 2113/4899 - Release Date: 03/28/12
> >>
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1424 / Virus Database: 2113/4899 - Release Date: 03/28/12
> >
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|