Re: [Amps] 3-500 Pins

[Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>]

There's a solder called Comsol. 5% tin, 93.5% lead 1.5%silver. Solidus temp 290 
deg C: liquidus 300 deg C.
If something higher is needed, there's LM5 which is silver cadmium with a 
solidus of 338 deg C and liquidus of 390 deg C. 
That's probably starting to push the seals a bit, and needs an exceedingly hot 
iron. If there's room, a piece of raw potato around the pin and seal would help.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps