On Mon, 11 Jan 1999 18:55:15 -0500 "Walter Fairclough"
<wfairclo@netcom.ca> writes:
>
>I've been told that the plate current meter on the SB-220 can be
>replaced
>with a meter from a Heath HM-102 wattmeter. I've noticed that the
>meter
>movement on the one in the HM-102 is approx. 1/2" in diameter while
>the one
>from the SB-220 is larger at about 1 to 1-1/4" in diameter.
There are actually 3 HM-102 meters in use. The original had the large
diameter movement and was USA made. The small one is electrically
identical and is from Japan. The third is a completely different unit
with a solid white case and different scale mounting altho it appears to
have the Jap movement....not sure about that tho.
>
>I think the resistance in the SB-220 meter is approx. 1400 ohms and
>its FSD
>is 2ua. I don't know what the specs are on the one in the HM-102.
SB200/201, SB220/221/HL2200 and early HM-102 all used the same 1400Ohm
200ua meter, only the scale changed.
73 Carl KM1H
>
>Can anyone tell me if they are interchangeable or not? I'd hate to
>blow a
>good meter.
>
>Thanks
>
>Walter-VE3EN
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|