Gent's
According to the specifications on Imam's web page the max plate voltage
is indicated as being 2,200 maximum in normal AB2 service.
I just finished the replacement of the rectifier string (lost one) and
while at it the filter caps on a MLA2500 everything worked out fine and
after performing the preliminary "testing" before replacing the 8875 the
voltage is reading 2,400.at idle, yes I did check it with 3 different
meters (2) digital and (1) Analog.
I did read and implemented many of the recommendations that Rich put on
his web page.
After consulting the "Dentron Manual" which indicates 2,250 at idle I
just wonder if the "extra" 200 +/- volts will present any problems.
Thanks You in advance for your Time and Input.
73's
Steve
oo
(__) AB2ET
"I bet two extra terrestrials"
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|