Amps
[Top] [All Lists]

[AMPS] ARRL and QST (and CW Relevance)

To: <amps@contesting.com>
Subject: [AMPS] ARRL and QST (and CW Relevance)
From: km1h@juno.com (km1h@juno.com)
Date: Sat, 30 Jan 1999 19:45:29 -0500


On Sat, 30 Jan 1999 08:29:29 -0600 Andy Wallace <andywallace@home.com>
writes:
>
>Bill-
>
>It is refreshing to see a voice of sanity here instead of the same 
>old
>platitudes. What happened to ham radio being on the cutting edge of
>technology? Many of us seem in love with 100 year old 
>technology--which is ok
>for them but is not likely to attract many new hams from the ranks of
>computer literate young people who are not lazy but by and large see 
>hams and
>their clinging to morse code as crushingly boring.


Good probably in the long term if you factor out corporate greed and
assume ( as in fight for) legislative spectrum protection.  At the
present rate of technology HF spectrum will be of little use to
commercial interests anyway not too far down the road.



>
>Andy  K5VM


Equally boring ( as in time wasted while I nap) are some new, wet ink,
engineers that cant even figure simple Ohms law problems without a
calculator.
I work with one real "piece of work" that I finally did the calcs, made
the changes, got the plots and THEN asked him for the values. A few of
the Sr Engineers are starting to catch on to my "in flight" methods.

73  Carl  KM1H






>
>Bill Turner, W7TI wrote:
>
>> Yes, it CAN work magic.  It's done with signal averaging.  The DSP
>> will record a short piece of signal, say a few hundred 
>milliseconds,
>> and analyze it looking for a pattern buried in the noise.  The 
>pattern
>> of course, is the tone from the signal you're trying to receive.  
>In
>> effect it "subtracts" the totally random stuff from the non-random
>> stuff and what's left is the signal.  If you ever get a chance, 
>watch
>> a modern digital storage oscilloscope in action.  Put in a sine 
>wave
>> which is totally buried in noise.  In the "normal" mode, nothing is
>> visible to the eye except what appears to be white noise.  Turn on 
>the
>> "averaging" mode and like magic, the noise fades away and the sine
>> wave appears.  The first time you see this happen it will give you
>> goose bumps.  At least it did me.
>>
>> This same technology can be applied to radio.  NASA has used it for
>> years to dig spacecraft signals out of the noise.  It works; now we
>> need it applied to amateur radio.  It's coming.
>>
>> 73, Bill W7TI
>>
>> --
>> FAQ on WWW:               http://www.contesting.com/ampfaq.html
>> Submissions:              amps@contesting.com
>> Administrative requests:  amps-REQUEST@contesting.com
>> Problems:                 owner-amps@contesting.com
>> Search:                   http://www.contesting.com/km9p/search.htm
>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>