Amps
[Top] [All Lists]

[AMPS] Input Tuned Circuits with Powdered Iron Toroids

To: <amps@contesting.com>
Subject: [AMPS] Input Tuned Circuits with Powdered Iron Toroids
From: jono@enteract.com (Jon Ogden)
Date: Mon, 8 Feb 1999 21:43:22 -0600
>As many builders of G-G amps have discovered, the efficiency of a G-G
>amp is significantly better if the input tuned circuit is located
>immediately adjacent to the tube socket.  Even six inches of RG-58
>between the tuned circuit and the tube socket significantly reduces
>efficiency, especially on 10 meters.

Interesting.  Why is this?  It seems like it could make for a rather 
crowded tube compartment.  The loss of any coax at HF seems minimal, and 
all that having a transmission line in there would do would be to rotate 
you on the Smith Chart back toward the source a slight amount before you 
apply your matching networks.  So why does it make a difference in 
efficiency?  What am I missing?

73,

Jon
KE9NA


-------------------------------------
Jon Ogden
KE9NA

http://www.qsl.net/ke9na    <--- CHECK IT OUT!  It's been updated!!!!!


"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>