>
>Hello All,
>
>After much 'goosey-ness' I finally applied HV to my 10 meter 4-400 amp.
>One of the two tubes appears really gassy. Looks more like a mercury vapor
>rectifier than a power tube. It has a very apparent violet glow to it.
>
>When I fired the amp up all was OK. I shorted the keying line to check the
>idling current and that's when I saw the glow. It appears to be drawing
>about 25 mils of grid current and the idling plate current seems a bit low
>at about 75 mils. This is all with 4500 volts on the plate.
>
>Is this tube beyond hope or is there some sort of 'de-gassing' procedure
>which MAY work (extended filament time, 'burn in' with a lower plate
>voltage, etc.)
>
? Seal problems don't get well, Steve
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|