>
>
>
>On Mon, 15 Mar 1999 14:16:06 -0800 Rich Measures <measures@vc.net>
>writes:
>>
>>
>>
>>>
>>>Did I miss something? How can you inductively couple a dipper to any
>>>inductor's series resonance without shorting the subject L
>>end-to-end? Any
>>>dips you get with the RFC just sitting there, ........
>>
>>Ä The hv rfc is not just sitting there, Dick. . Wired in, the
>>bottom end of the hv rfc connects to RF ground through the B+ bypass
>>capacitors.
>> The upper end of the rfc connects to the tune-C, which typically has a
>>moderately low reactance to ground. In practice, the not
>>strap-shorted method works.
>
>Not at all. The chap who suggested disconnecting the output tank was much
>more on track.
>Your method is a pure hit or miss approach.
>
? Can you explain why the no-strap method would miss a potentially
problematic resonance?
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|