Are you using the same manufacturer as your friends?
If so, yours should be the similar performance unless something is wrong.
David
hi. i am not use insulators between mosfet and heatsink in order to
have the minimum thermal resistance. I am using only silicon thermal conductive
paste to decrease the thermal resistance. So, the heatsink is connected with
the drain of each mosfet and the heatsink has the drain voltage.
I am using 12 Siliconix's IRFP360 mosfets, but i have order and soon i
will replace them with International Rectifier IRFP360 mosfets. Propably this
is the reason, that the amplifier don't give many watts at outupt.
The other reason, is that the material of ferrite cores (43 material)
is not the proper for 1-2mhz frequences. What do you think??
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|