Amps
[Top] [All Lists]

[AMPS] s meter calibration

To: <amps@contesting.com>
Subject: [AMPS] s meter calibration
From: nospam4me@juno.com (nospam4me@juno.com)
Date: Sun, 11 Jun 2000 22:33:05 -0700

Had a quick look at the site...   Their amplification abuse page 
says 3 dB is a one s-unit change on your receiver meter.  I was 
under the impression receiver s-meters were calibrated 50uV 
for S-9  and 6 dB per s-unit.  The occasional "other mfgr" using 
100uV for s-9

cheers
skipp 

--------- Forwarded message ----------
From: "Paul Christensen" <paulc@mediaone.net>
To: <amps@contesting.com>
To: <amps@contesting.com>
Date: Mon, 12 Jun 2000 13:18:45 -0400
Subject: [AMPS] New Amplifier Manufacturer
Message-ID: <049901bfd492$46ccbdc0$3a332a3f@paulc>


Check out the following link:

http://www.cticomtec.com/index.html

A new company, located in northeast Florida is producing a new line of
amplifiers that take on many attributes of the classic amplifiers of the
'50s and '60s era.  K-logic is used extensively for control and both
internal/external components and indicators appear to be derived from
military electronics.

Their product line includes a 4CX250-based H.F. amp with outboard P.S., a
high-power ATU, and a new 6-meter amplifier.  Anyone know anything else
about them?  Did they make an appearance at Dayton this year?

-Paul, W9AC



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>