>
>I have an MLA-2500 with soft tubes. Seeking information on modification
>using a
>pair of 4cx800 tubes in grounded grid.thus eliminating a seperate bias
>supply and screen supply.
>
You will need a high pressure centrifugal blower. The tubes need to be
relocated near the Tune-C. A small 6v transformer is needed to increase
the heater potential.
good luck, Mel
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|