>
>
>-----Original Message-----
>From: Jim Barber <N7CXI@SiliconPixels.com>
>To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
>Date: 09 October 2001 04:57
>Subject: Re: [AMPS] CW/SSB Tune Up
>
>
>>
>>
>>>>Someone posted a few days ago that when tuning up a
>>>>triode linear for peak out on SSB, one should call a
>>>>steady "Helloooooo", or I have also heard "woof, woof",
>>>>hi. That this procedure is the "proper" SSB peak out
>>>>tune up procedure. Is it??
>>>
>>>It's bandini - except c. 27MHz.
>>
>>Only half kidding here - Try "four, four, four, four" (enunciate)
>>and watch the meter. Out of all the silliness tried, it seems
>>to kick the hardest, at least with my voice, mics, and meters.
>Some years ago, a friend in the mobile radio trade told me that 'five five
>five....' gave the highest mod index when checking links and sets.
>
// Multitone modulation tuneup requires an oscilloscope. Pulsed single
tone tuneup does not.
cheers, Steve
- R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|