>
>
>From: Measures
>
>>
>> As I recall, with the 220's case off, there is no exposed 3kV.
>>
>>
>
>Unless I'm mistaken, the "business end" of the capacitor bank
>and the bleeder string are exposed just behind the right side
>of the front panel (behind the meters). I don't recall any shield
>between the capacitor box and front panel.
>
// Surely. So what kind of a schmo is going to slide his hand down into
the HV supply? With part of the hand touching gnd, loosing part of a
finger would be the likely result. Even with the case on, the SB-220 is
not fool-proof because it is possible to insert a piece of 22-gauge
insulated wire through the top and touch either anode.
Cheers, Joe
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- R. L. Measures, 805.386.3734, AG6K, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|