On Mon, 28 Jan 2002 14:31:06 +0000 "Ian White, G3SEK" <G3SEK@ifwtech.com>
writes:
<snip>
> When everything is up and running, I suppose it would be possible to
> ift the screen supply to a large resistor connected from the B+... but
> I'd never feel easy about it, and certainly wouldn't recommend anyone
> else to do that.
I've been running my 4CX1500B like that for... 15 years. The low end
of the plate supply bleed (50K from 3 KV) is the screen voltage source.
I also have a 350V SCR crowbar, in the plate supply at the low end of the
bleed, in case something goes awry with the screen regulator or the wires
between the plate and screen supply. Works fine and the crowbar has
never crowed... except for test.
73,
Marv WC6W
*
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|