>Hey Gang,
>
>In doing a search around the web I'm coming up pretty empty for a source
>for a good (hopefully inexpensive) HV Probe. My DVM is rated for 1KV
>max. Any ideas?
>
? I made one in a small plastic box with a 400M?, 50kV-rated resistor.
I put a 20t trimpot across the output to zero in the calibration for a
10M? DMM load. The division ratio is 1000 to 1. Fluke sells a probe
that does pretty much the same thing.
cheers, Gerry
- R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K,
www.vcnet.com/measures.
end
|