On Thursday 30 October 2003 10:25, Walter Muth wrote:
> Hi,
>
> what would be the best parameters you can give to characterize a
> "matched pair " for a high power push-pull amp design ( lets think
> about 600watts)
>
> Vgs(th) and gfs ?
Provide separate bias setting pots and there's no need to match Vgs.
>
> What tolerances may be acceptable?
+/- 10% on gm was a normal selection when I was on that side of things. If the
devices come from the same batch code, use separate bies adjusters and
there's probably no need to do any matching.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|