John,
I'm glad you mentioned that. Yes I was going to include info on switching
transformers, etc. Also, that you mentioned the info in a manufacturers book
(TI). That's just it, there's nothing with anything useful unless you go to one
of the manufacturers texts. The only good stuff of any benefit I've seen on the
net is at a manufacturers website who makes components. Tempel Steel and a few
other core manufacturers have some of the formulas but not anything hardly
written in examples, etc. I'll sure download the TI book and read it, thanks
for the info.
Best,
Will
>*********** REPLY SEPARATOR ***********
>
>On 3/6/05 at 12:15 PM Japerlick@aol.com wrote:
>wILL
>
>Will you be covering higher frequency transformers, like used in
>switch-mode power supplies, also? I think there is a LOT of information
>out there on SMPS transformers and this is definitely not a lost art.
>Check out the TI website for their excellent "Magnetics Manual." It
>mostly covers higher frequency stuff but you might find it interesting.
>
>Let me know when you hvae it done...I'd like to take a look at what you
>have.
>
>John
>
>
>__________ NOD32 1.999 (20050215) Information __________
>
>This message was checked by NOD32 antivirus system.
>http://www.nod32.com
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|