Angelo,
Really you cant tell that way (using the resistance) unless you know the mean
lenght of turn, how many turns per layer, and how many layers they are in the
winding. This then would give you how long the wire is and you could then use
the resistance and the length to determine the wire size. If it's possible to
use a micrometer or a wire gauge to see what the secondary wire size is, then
one can find out what its rating is. In amateur service, ICAS used anywhere
from 700 to 900 circular mils per ampere. CCS uses anyhwere from say 1000 to
1200 cir. mil. per amp. If you can find the wire size, go look at a wire chart
for how many circular mils it has and divide by the above numbers to determine
its current carrying ability. IE, 10,000 circular mils running at 1000 cir mil
per amp = 10 amperes.
Best,
Will
*********** REPLY SEPARATOR ***********
On 4/29/05 at 3:01 PM Angelo Karabetsos wrote:
>I would like to find out the current rating of a transformer. Primary
>voltage taps 0v-110v-115v-208v-230v and secondary taps 3450v-0v-3450v and
>secondary resistance of 53.5ohms from 0v to 3450v tap and 107ohms from
>3450v
>to 3450v tap. All measurements done with a simple DMM. The commercial
>amplifier it came out of has a plate current meter with a max reading of
>600ma. How could I find out the CCS or ICAS rating?
>Cheers Angelo
>
>_________________________________________________________________
>Take charge with a pop-up guard built on patented Microsoft® SmartScreen
>Technology
>http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=http://hotmail.com/enca&HL=Market_MSNIS_Taglines
> Start enjoying all the benefits of MSN® Premium right now and get the
>first two months FREE*.
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|