Pete,
Thanks, as you know, I live right across the river from you. Really about 2-1/2
miles above Proctorville in Rome.
Blueridge carrys a lot of brass and did carry aluminum too. A lot of hobby
builders in models, etc. buy from them. Unless they've expanded, they have a
small showroom when you first go in and like a loading dock and garage door
right beside the front door if I remember. To the right there they had all that
brass and where they cut it. They do stock a lot of import lathes, mills, saws,
etc. At the time, I bought all three from them. They've got a lot more too,
especially tooling. For our kind of work building chassis and cabinets, they
have a lot of stuff for it. The owner is a really good guy and was who I dealt
with about 10 years back. If you want to buy equipment, he will call anyone you
want down here for financing and set it up. If you ever get a chance, you ought
to stop by and see what they have. They will move on the price too I found.
I'm not quiet sure on where the store is for Harbor Tools up at Crosslanes, I
just know one is there. I've been to the one down in Lexington off New Circle
Road. Last time I was up at Cross Lanes was when I was married and my ex-wife
was from that reigon. That was 10 years ago too. I think it's off Rt 60
somewhere as I seem to remember looking up the address once.
Best,
Will
*********** REPLY SEPARATOR ***********
On 8/9/05 at 11:54 AM Pete Stark wrote:
>Will:
>
> I drove past the Blue Ridge tools place yesterday.
>It appears to be accessable to someone in a chair.
>The front door is at parking lot level and all you would have to do is get
>over the threshold. I did not stop as I was running late but I wanted to
>see where the place was for future refrence.
>
>Pete K4OM, Huntington.
>
>-----Original Message-----
>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
>Behalf Of Will Matney
>Sent: Tuesday, August 09, 2005 10:48 AM
>To: amps@contesting.com
>Subject: Re: [Amps] 6146's
>
>
>David,
>
>I assume your wanting to use these in the final PA of a transmitter? If so,
>what I'd do is plug them in and try them out. Plug the tubes in and set the
>bias to where they operate correctly. If the PA has a neutralizing circuit,
>that may have to be tinkered with. I forget the details for the changeover
>on the Yaseu FT-101 but if I recall, you had to change a capacitor in the
>neutralizing circuit, and something in the bias. It's been so long since I
>converted one over I cant remember all the details. In the case of the
>6146A
>to B, you may not have to, I don't know. I highly doubt you'll damage
>anything as long as the tubes output is the same as the A was. That's
>mainly
>a bias adjustment.
>
>Best,
>
>Will
>
>*********** REPLY SEPARATOR ***********
>
>On 8/9/05 at 10:18 AM David C. Hallam wrote:
>
>>Will,
>>
>>That is in line with what I was thinking that maybe they had some bulbs
>>that
>>were already etched but used them to make 6146A's. I want 6146A's and not
>>6146B/W's. The 6146B may be a better tube, slightly more plate
>>dissipation,
>>etc., but it's not a direct replacement in all cases. What I actually
>have
>>is still in question.
>>
>>73
>>David
>>
>>-----Original Message-----
>>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
>>Behalf Of Will Matney
>>Sent: Tuesday, August 09, 2005 6:02 AM
>>To: amps@contesting.com
>>Subject: Re: [Amps] 6146's
>>
>>
>>David,
>>
>>Those tubes were the last GE made. What they did was, they didn't want to
>>run several lines and still build the A numbered tubes so they took The
>B's
>>or W's and re-stamped them wit white paint as A so they'd have the part
>>number to sell. It's a better tube than the A and a direct replacement.
>>
>>Best,
>>
>>Will
>>
>>*********** REPLY SEPARATOR ***********
>>
>>On 8/8/05 at 2:37 PM David C. Hallam wrote:
>>
>>>I just acquired several 6146's with strange markings. They are General
>>>Electric branded and marked 6146A in ink or paint or whatever it is.
>>>However, etched in the glass some are marked 6146B or 6146W. Has anyone
>>>run across this before or know anything about it?
>>>
>>>David C. Hallam
>>>KC2JD
>>>
>>>--
>>>Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
>>>
>>>_______________________________________________
>>>Amps mailing list
>>>Amps@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>>
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|