Amps
[Top] [All Lists]

Re: [Amps] IM distortion and such

To: amps@contesting.com
Subject: Re: [Amps] IM distortion and such
From: "Will Matney" <craxd1@verizon.net>
Reply-to: craxd1@verizon.net
Date: Tue, 27 Jun 2006 09:51:41 -0400
List-post: <mailto:amps@contesting.com>
Rich,

It was the same thing as they printed it I was refering, or to me it was as I 
wrote it. It was Eimacs maximum rating at 1 KW input, G-G, class B RF amp 
showing it's minimum distortion, or the way they have it listed.

Best,

Will

*********** REPLY SEPARATOR  ***********

On 6/27/06 at 6:19 AM R L Measures wrote:

>On Jun 27, 2006, at 2:46 AM, Tom W8JI wrote:
>
>>> They can be used on up in current, say for pulse circuits
>>> and RF heating. The 400 mA is the maximum plate current at
>>> single tone for minimum distortion. That's for 600 watts
>>> PEP useful power each. That's listed in the tables on page
>>> 2 or 3 under a class B RF amp.
>>
>> Will,
>>
>> Where did you get the idea 400mA is a "minimum distortion"
>> condition?
>
>Good point, Tom.  Will should have said something like:  for minimal  
>distortion, the max rated anode-I is 400mA.
>>
>> 73 Tom
>>
>>
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
>R L MEASURES, AG6K. 805-386-3734
>r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>