FWIW, I use the 20m position on my homebrew 3-500 amp. It works
better on that tap than on the 15m tap. That is not to say that
your's will be the same.
Try it out on both positions with low drive and make the comparison.
73, Alek.
VK6APK
At 07:20 AM 25/09/2009, Steve Sala wrote:
>What do I have to to use the amplifier on 17 meters? I suspect that
>one uses the 21 MHz position since that is closer to 18 MHz than 14
>MHz? Can the parasitic chokes take the frequencies?
>
>Steve
>K7AWB
>Nine Mile Falls, WA
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>E-mail message checked by Spyware Doctor (6.1.0.447)
>Database version: 6.13340
>http://www.pctools.com/en/spyware-doctor-antivirus/
E-mail message checked by Spyware Doctor (6.1.0.447)
Database version: 6.13340
http://www.pctools.com/en/spyware-doctor-antivirus/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|