If you are near the current limit on the ceramic caps, use multiple smaller
value caps in parallel so the current is less in each.
73
Gary K4FMX
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of Bill, W6WRT
> Sent: Monday, December 07, 2009 12:55 AM
> To: amps@contesting.com
> Subject: Re: [Amps] TITAN II tuning and loading padder capacitors
>
> ORIGINAL MESSAGE:
>
> On Sun, 6 Dec 2009 14:30:38 -0500, "David J Windisch"
> <davidjw@cinci.rr.com>
> wrote:
>
> >Are these N750 capacitors suitable as padders in this r-f application?
>
> REPLY:
>
> A lot of manufacturers use N750 or similar caps and they do drift. If
> the drift
> isn't excessive, I'd ignore it. Does the power output actually change or
> are you
> seeing just the plate and grid readings changing?
>
> If you want to fix it , try finding either some NP0 ceramic or
> transmitting-rated mica capacitors. They are hard to find with high
> enough
> current ratings for legal limit amps, and they are expensive if bought
> new.
> Don't be tempted to use the little ones the size of postage stamps
> unless you
> parallel a bunch of them to spread the heat dissipation.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|