According to my Clipperton-L Operating Manual:
DC Plate Voltage: SSB (Idle +2700v approximate)
CW (Idle +1800v approximate)
(There are NO parameters for plate current)
Instructions say to tune for maximum output in the CW position.
With 1 KW INPUT (design parameter) the plate current should be
approximately 666 ma with plate voltage approximately 1500v.
"Once you have reached the 1 KW DC input level in the CW mode, you
need only put the CW/SSB switch in the SSB position for voice
operation."
Don
N8DE
Quoting Lee Buller <k0wa@swbell.net>:
>
>
> Can anyone tell me the following....
>
> Dentron Clipperton - L
>
> SSB Plate Voltage =
> CW Pate Voltage =
> Maximum Current =
>
> The instruction manual on Edbris doesn't clearly state any of that
> information.
>
> Lee Buller
> K0WA
>
>
>
> Ham Radio Operators: Kansas QSO Party is August 28-29, 2010. See
> www.ksqsoparty.org for details
>
> In our day and age it seems that Common Sense is in short supply.
> If you don't have any Common Sense - get some Common Sense and use
> it. If you can't find any Common Sense, ask for help from somebody
> who has some Common Sense. Is Common Sense divine?
>
> Common Sense is the image of the Creator expressing revealed truth
> in my mind. - J. Wolf
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|