The correct fuse is 12A SB @ 234v.
Don
N8DE
Quoting Mike <noddy1211@sbcglobal.net>:
> That does not make sense.
>
> The fuse would be double the value for 120v, mine is a 15amp at 240v and the
> fuse I took out for 120v was a 30amp.
>
> Lower the voltage= higher the fuse value.
>
> Mike, K6BR
>
> -----Original Message-----
>
>
> I recently bought a Dentron Clipperton L and the fuse is gone. Everything
> else
> is in fine order. Looking at the manual, in the PARTS LIST (page 8), it
> says F1
> is "12A at 117v, 18A at 234V."
>
>
> However, in the schematic, F1 is labeled "18A SB FUSE (12A SB at 234V AC)."
>
> This amp appears to be still wired for 110-120v.
>
> I suspect the 18A SB Fuse is the correct one for our 110-120V mains here in
> the
> States. Can someone please verify this?
>
> Extra points if you can point me in the right direction for buying these
> fuses.
>
> 73!
> Jack, K6JEB
> http://www.k6jeb.com/
>
> PS - A short intro since I recently joined this list: I've been a ham since
>
> 1983. I enjoy DXing, contesting, building gear and antennas, QRP, digital
> modes, CW, and many other facets of this great hobby. Back in 1983, there
> were
> even more cranks saying ham radio was dying. I guess it's dying even more
> now
> since our numbers have gone up considerably, and the CW sub-bands have only
> become more popular. If this is a dying hobby, please give me the grave
> with
> the STEPPIR mounted to the top of my Rohn gravestone/tower.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|