The manual for the AL811 says the supply is 1500V at .7A, which
doesn't agree well with the Ameritron trany spec. If it was 2KV at
.7A it would be perfect.
- Paul
At 06:24 PM 1/1/2014, Paul Baldock wrote:
According to the American Website that trany is 1500V @ .5A, so the
1500V should give 2KV DC, but I need about .8A for this AM project.
You are right, the price is very good.
- Paul
At 05:28 PM 1/1/2014, Carl wrote:
Too bad you cant use 1800V as the one from the AL-811/811H is the
best deal on the planet.
Carl
KM1H
----- Original Message ----- From: "Paul Baldock" <paul@paulbaldock.com>
To: <amps@contesting.com>; <boatanchors@mailman.qth.net>
Sent: Wednesday, January 01, 2014 5:51 PM
Subject: [Amps] High Voltage Transformer(s) wanted
High Voltage Transformer wanted:
I am looking for a transformer that when rectified and cap
filtered will provide about 2KV at .8A or two transformers where
one will provide 2KV at .5A and the second 2KV at .3A.
Thanks
- Paul
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6967 - Release Date: 01/01/14
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|