Amps
[Top] [All Lists]

[Amps] QRO operation into a 80 meter vertical

To: amps@contesting.com
Subject: [Amps] QRO operation into a 80 meter vertical
From: donroden@hiwaay.net
Date: Thu, 20 Feb 2014 17:43:15 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Slightly OFF TOPIC , so respond direct please.

I have a 145 foot Rohn 45G with insulated guys, but grounded base in concrete.

no room for radials ... 33 feet at most over 60 degrees.

Tower is between hamshack ( house ) and garage
and concrete drive ( 300 degrees = no radials )

I would like to experiment with a ground independent (or less ground dependent) 1/2 wave vertical radiator ..... a vertical dipole hung from 145 feet, maybe six feet from the tower face or leg. Fed in the center or at the bottom.

Similar to a sloper, but closer to the tower. Maybe connect the dipole to the top of the tower and feed it like a folded unipole ?? Open to all suggestions.

I'd love to hear how you constructed your high impedance tuners too.

Don W4DNR

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>