Quoting John Lyles <jtml@losalamos.com>:
In cavity circuits, we can use damping resistances instead of
parasitic suppressors
I installed an RCA 20KW FM transmitter in 1976 that included a couple of
ceramic insulators that supported a 50 ohm /100 watt film resistor in
the cavity. There were brass dipole elements on each end of the
resistor.
I looked on the schematic to see which wires connected to the resistor.....
I couldn't even find the resistor on the schematic.
There was a brief mention of the resistor and it's function in the
instruction manual.
Don R W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|