I use white PVC pipe. Nothing has melted yet.
- Paul
At 11:35 AM 10/28/2016, Bill Turner wrote:
------------ ORIGINAL MESSAGE ------------(may be snipped)
On Thu, 27 Oct 2016 09:10:29 -0400, you wrote:
>Hello,
>
>Need a couple of teflon chimneys for a pair of GS35B amps. Suggestions on
>where I can get them?
>
>Presently using PVC, but have had not good results in the long run with
>these type of chimneys especially since I do a lot of RTTY contesting.
>
> 73,
> Mike, K4GMH
REPLY:
You can use a Coleman lantern replacement glass chimney. I have done
this on several GS35b amps and they work perfectly. There are several
sizes available so measure carefully to get the right one. It will fit
with about a 1/8 inch gap and is just the right height. I mounted mine
with a dab of silicone RTV right to the chassis, easily removed if
ever necessary.
As a bonus,the chimneys are made of very heat resistant glass.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|