Date: Fri, 25 Oct 2013 05:38:56 +0000
From: "Fuqua, Bill L" <wlfuqu00@uky.edu>
To: Jim Garland <4cx250b@miamioh.edu>, "Amps@contesting.com"
<Amps@contesting.com>
Subject: Re: [Amps] HV fuses
This does not sound right. I assume you are saying that they are glass fuses.
I suspect if you blow one in a HV powe rsupply it will shatter or explode into
pieces if
you have a reasonable value of filter capacitor. Do you have a data sheet on
these
fuses?
73
Bill wa4lav
## why would they explode ? Mine don’t. The 50 ohm glitch R LIMITS the
current..and the
HV fuse INTERRUPTS the fault current. BTW, you always put the HV fuse B4
the glitch R. Reason is, if the glitch was damaged, and dangling down onto
the chassis, you
want the HV fuse INBOARD of any glitch, so the fuse will open.
Yes, you can parallel em for more current..and you can also series em for
more HV.
You can also wire em series-parallel for more current + Voltage.
## another useful place to insert a HV fuse is between EITHER plate xfmr
secondary.....and the
FWB or FWD. Then if any B+ shorts in the filter caps, or any problems
inboard of the B+ fuse,
then you are still protected. Dirt cheap insurance. I have seen the AC HV
fuse blown open twice
and the B+ HV fuse blown several times... while de-bugging a new hb RF deck.
Later.... Jim VE7RF
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|