[AMPS] Low Output on 10 meters

To:	<amps@contesting.com>
Subject:	[AMPS] Low Output on 10 meters
From:	ns1z@agate.net (John / NS1Z)
Date:	Fri, 28 Aug 1998 10:27:20 +0000

OK, time for amps 101 again:

I'll concede the pi is back to back Ls but, if it is not resonant at the
operating frequency, what is it that everyone is tuning it to....

At 02:27 AM 8/28/98 -0800, Rich Measures wrote:
>
>A pi-network is two L-networks in series.  It is not resonant at the 
>operating frequency
>>_______________________________________________________________


John Wilcox  NS1Z
FN44rn
ns1z@agate.net
fon: 207-364-2246

871 Route 120
Rumford, ME 04276-3836

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Low Output on 10 meters, (continued) [AMPS] Low Output on 10 meters, John / NS1Z [AMPS] Low Output on 10 meters, Bill Turner, W7TI [AMPS] Low Output on 10 meters, Jon Ogden [AMPS] Low Output on 10 meters, Pete Smith [AMPS] Low Output on 10 meters, Larry Molitor [AMPS] Re: Low Output on 10 meters, Jan-Erik Holm [AMPS] Low Output on 10 meters, John / NS1Z [AMPS] Low Output on 10 meters, Jon Ogden [AMPS] Low Output on 10 meters, Jon Ogden [AMPS] Low Output on 10 meters, Rich Measures [AMPS] Low Output on 10 meters, John / NS1Z <=

Previous by Date:	[AMPS] Low Output on 10 meters, Rich Measures
Next by Date:	[AMPS] High isolation RF amplifers., Dave Kirkby
Previous by Thread:	[AMPS] Low Output on 10 meters, Rich Measures
Next by Thread:	[AMPS] 813 amp, david
Indexes:	[Date] [Thread] [Top] [All Lists]