2KD-5 requires unblocking the 5th bandswitch position, adding the 10m coil and
capacitors, and also changing the plate tank coil that is used for 10m. The
Henry "kit" came with all these parts, and I installed them in mine at the time
(c. 1982). Do you have the ribbon wound plate tank coil?
WB2WIK/6
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Roland AH6RR
Sent: Thursday, November 12, 2009 3:50 PM
To: amps@contesting.com
Subject: [Amps] Henry 2KD-5 10 Meter mod
Hello All,
I have just bought a Henry 2KD-5 that does not have the 10 meter mod done to
it. It does have the 10M input coil bit in the instructions I downloaded it
states to change L2 to the one supplied in the kit. Well since I do not have
the new coil can any one tell me what the specs are? Dia and how many turns?
would like to get this going on 10 also. The L2 on mine is for 24MHZ according
to the parts list. Can I just take 3-4 turns out of mine. Thanks
Roland AH6RR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|