Lots of .01 5-8 KV caps available on EBay from Chinese sellers. They are
easy to deal with and sell pretty good stuff. I'm using some of their stuff
in my 8877 project now underway.
73
Jim W7RY
----- Original Message -----
From: "Steve Flood" <kk7uv@bresnan.net>
To: <amps@contesting.com>; <rfamplifiers@yahoogroups.com>
Sent: Sunday, January 11, 2009 5:38 PM
Subject: [Amps] plate bypass caps
>I have an Ameritron plate choke mounted in my amp project. It is 225uH.
>With 2700 plate volts, this is 2544 ohms at 1.8 MHz and thus 1.06 amps. I
>am now assuming the plate bypass capacitor at the base of the choke must be
>very low reactance on 1.8 Mhz which tells me .01 or .02 uF at maybe 5kv
>rating. Am I thinking about this correctly? If so, such capacitors seem
>quite rare - the usual internet sources only carry .001 or .002 which would
>seem ineffective at bypassing at 1.8 MHz. Yet, there are many 160m amp
>designs that use .001 for bypass. Perhaps they are using much much larger
>plate chokes?
>
> Steve, KK7UV
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|