[AMPS] Solid State Relay for Anode Primary ?

To:	<amps@contesting.com>
Subject:	[AMPS] Solid State Relay for Anode Primary ?
From:	daveb@buffnet.net (daveb)
Date:	Wed, 19 Nov 1997 21:04:37 -0500

Hi,

Seeing that the screen supply question got some people going here
is another. 

Is there any reason I shouldn't use a solid state relay to switch
an anode transformer primary (2.5Kw level) ? I've noticed that
25 Amp versions are available that switch on at zero crossing.
Sounds like a nice way to eliminate the mechanical relay with current
limit resistor for surge protection.

Thanks

--db-- (AA2GF)


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread]	Current Thread	[Next in Thread>
[AMPS] Solid State Relay for Anode Primary ?, daveb <= [AMPS] Solid State Relay for Anode Primary ?, w8jitom@postoffice.worldnet.att.net [AMPS] Solid State Relay for Anode Primary ?, Rich Measures [AMPS] Solid State Relay for Anode Primary ?, Dave Kirkby [AMPS] Solid State Relay for Anode Primary ?, Rich Measures

Previous by Date:	[AMPS] Screen Supplys, Rich Measures
Next by Date:	[AMPS] Re: series filaments, w8jitom@postoffice.worldnet.att.net
Previous by Thread:	[AMPS] screen power supply, John Lyles
Next by Thread:	[AMPS] Solid State Relay for Anode Primary ?, w8jitom@postoffice.worldnet.att.net
Indexes:	[Date] [Thread] [Top] [All Lists]