W7CW Jay E Ostrem wrote:
> At 11:36 PM 3/8/98 -0800, you wrote:
> >Hi all,
> > I'm geting some funny readings (or so they seem) when I try to
> transmit
> >using my Dentron Clipperton L. I'm using an FT 840 for a transceiver
> and
> >a MFJ 896 Antenna Tuner sits on the other side of the Dentron. When
> the
> >Dentron is turned on, I get 2500v plate and when it's keyed in CW
> mode,
> >I get .666-.750 amps current. But I can't seem to get the MFJ 986 to
> >register any more than about 150watts out in CW and 100w out in SSB
> >mode, in 40, 20, and 15 mtr bands. What's going on here. Am I doing
> >something wrong and if so, what should I be doing?
> >
> Jonathan, I had a similar problem 15 yrs ago with the amp. I
> inadvertantly used the wrong antenna,and caused an arc across the tank
>
> coil, which is rolled on a phenolic tube. It left a carbon trace on he
>
> tube, effectively shorting some windings. I tried grinding it out,
> but
> ultimately had to replace the coil.
> 73 Jay W7CW
>
> 1AB Ranch
> Gillette, Wyoming
Thanks Jay for the suggestion. Assuming that's what happened here.
How can I verify it and where can I find such a replacement part?
73s de Jonathan ko6xs
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|