Very true but adding 3dB or so of attenuation to most riceboxes wont
affect on the air receiver performance where external noise
predominates.
Carl
KM1H
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: <amps@contesting.com>
Sent: Monday, November 03, 2008 11:04 AM
Subject: Re: [Amps] coax length between transceiver and amplifier
> On Sun, 2 Nov 2008 20:51:46 -0500, Carl wrote:
>
>>As long as there is sufficient drive available even a modest loss in
>>the
>>coax wont hurt.
>
> Except on receive, if the preamp is at the RX. If the preamp is
> between
> the antenna and the power amp, I agree that loss between the
> transmitter
> and the power amp doesn't matter.
>
> Shielding should not be an issue for any reasonable coax unless your
> shack is AWFULLY noisy.
>
> 73,
>
> Jim K9YC
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|