Re: [Amps] 813's

Amps

Re: [Amps] 813's

To:	craxd1@verizon.net, amps@contesting.com
Subject:	Re: [Amps] 813's
From:	Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk>
Reply-to:	g3rzp@g3rzp.wanadoo.co.uk
Date:	Wed, 31 May 2006 10:58:25 +0200 (CEST)
List-post:	<mailto:amps@contesting.com>

Not only did Collins (amongst many others) run 813s in the horizontal position, 
there was even a Collins civil aircraft TX of the late 40s, early 50s which 
used an 813 at an angle of about 60 degrees or so, to keep the total height 
down. I saw one at Dayton the other year.
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] 813's, (continued) Re: [Amps] 813's, Gudguyham Re: [Amps] 813's, Gudguyham Re: [Amps] 813's, Gudguyham Re: [Amps] 813's, Gudguyham [Amps] 813's, carl s. Re: [Amps] 813's, Peter Voelpel Re: [Amps] 813's, Will Matney Re: [Amps] 813's, Steve Thompson Re: [Amps] 813's, Bill Fuqua Re: [Amps] 813's, Larry Re: [Amps] 813's, Peter Chadwick <= Re: [Amps] 813's, GGLL

Previous by Date:	Re: [Amps] Looking for shematic to set MRF448 into Class AB, sm0aom
Next by Date:	Re: [Amps] Looking for shematic to set MRF448 into Class AB, DH5HV
Previous by Thread:	Re: [Amps] 813's, Larry
Next by Thread:	Re: [Amps] 813's, GGLL
Indexes:	[Date] [Thread] [Top] [All Lists]