W8JI:
The real problem is wasted power and heat. Letting the bias run in
full-tilt on condition is like putting a 600-1000 watt space heater
the room.
Ok, let me see: 1500 out at 60% efficiency means 2500 in. If the bias
current is set at 20% max. plate current, zero signal plate dissipation
would be 500W. You're 3dB off, Tom.
Further, for 50% on, 50% off contest duty cycle, "wasted" dissipation
would be just 250W. Not much of a heater.
On the other hand, I could understand the economics behind EBS approach:
for a few dollars in parts, the manufacturer could use a smaller blower
with corresponding cost reduction. Not sure if an economy in the cooling
system department is a good idea, though.
73 de Mike, YO3CTK
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|