Bill Smith wrote:
>
> Another dumb question. My HA-10 does not have a T/R relay built into it.
> No real problem to add one but my question is "How large an ampere rating
> does the relay have to have in order not to be destroyed by the High Power.
> I'd like to use a 12 volt 10 amp Plug In Type relay.
A 10 amp relay should be big enough. But I would remove the plug-in base and
connect the coax directly to the lugs attached to the contacts to reduce
impedance bumps.
73,
Vic, K2VCO
Fresno CA
--
FAQ on WWW: http://www.contesting.com/ampsfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|